WSP2 Electric Lopper Battery Pruning Shears Electric Pruning Shears - Intl
- electric pruner shear
- pruner shears
- battery pruner shear
- shear electric
- electric pruning
เปรียบเทียบราคา WSP2 Electric Lopper Battery Pruning Shears Electric Pruning Shears - Intl
Parameter name |
MODE |
|||
WS P-2 |
|
|||
Pruning Shear |
Cutting Diameter |
0mm-25mm |
|
|
Related Voltage |
DC 36V |
|
||
Rated Current |
10.0A |
|
||
Protection Current |
35 A |
|
||
Package |
√ |
|
||
Weight
|
1.0KG
|
|
||
Lithium Battery |
Rated Voltage |
DC 36V |
|
|
Rated Capacity |
4.0 AH |
|
||
Charger |
Overload Current |
45±10 A |
|
|
Weight
|
1.0KG
|
|
||
Input Voltage |
AC220-240V/50-60Hz |
|
||
Output Voltage |
DC 38V |
|
|
|
Charging Current |
1.0A |
|
|
|
Charging time |
4.0-4.5 H |
|
(2) working principle
The electric pruner consists of shear, integrated circuit, motor assembly, reduction gear and Li-battery. When you work, just press the trigger and start the brushless motor. It can open and close 9 to 12 times through Gear down box device. So that it can prune branch.
(3)Operation and Attention
Operation
1.Pls charge the battery fully and pull out the charger
2.the battery into the tool bag then connect the cable to the battery tightly
3.Wrap the tool bag around the waist and adjust the position.
4.Turn on the power switch
5.Drive the trigger 2 times continuously then open the blade and you can work
6.When you stop working. Please press the trigger and maintain 5 seconds unchanged then the blade will keep closed state. Then turn off the power switch and pull out the cable from the battery.
Attention:
1.The pruner is designed for cutting fruit tree, gardening...etc., other thing is forbidden.
2.If the branch is too big, too hard or too dried, please don’t use it. Or it will damage the pruner
3.The biggest cutting diameter is 30mm.
4.If the blade is stuck in the branch, the pruner will stop cutting automatically. You just need to move it slightly.
5.When you prune the branch, Please don’t prune it vertically, Please prune it scantly and it can extend the working life.
6.Please don’t open or disassemble the shell when the pruner is running.
7.Please don’t touch the blade when the pruner is running. It can avoid your finger or other part is hurt.
8.It is forbidden to use when it is raining or snowing. It can avoid that the circuit is broken.
Maintenance
1.Please turn off the power when you maintain the pruner
2.Please charge the battery fully before working
3.Every time when you finish it, Please use wet cleaning cloth to clean the blade and put some slushing oil on the blade,. If the edge of blade becomes blunt, Please grind the blade with use the oilstone.
4.If the moving blade is damaged heavily and can’t use again, Please replace a new one. The procedure is like this, Take out the up cover, Disassemble and take out the screw, Then take out the old blade and change a new blade, then tighten the screw.
5.Please tighten all of screws regularly every week and make sure it is enough safe.
6.Please don’t disassemble the pruner if you don’t have professional who is appointed by the factory.
7.Please keep it far away from somewhere children can touch. In order to avoid of danger which can cause.
8.If you don’t use it for a long time, Please charge it fully before you have them in store. Or the battery will be broken due to self discharge.
9.When you don’t use it for a long time, please clean the surface of pruner, and put some slushing oil on the blade. They should be kept in good condition, which protect them from pressure, moisture or insolation. Please don’t put them on the ground directly.
Spare parts
1.One pcs moving blade
2.One pcs battery
3.One pcs professional charger
4.One pcs cable
5 One set of accessory
6.One pcs tool bag
7.One pcs tool case.
8.manual
9.certificate
WSP2 Electric Lopper Battery Pruning Shears Electric Pruning Shears - Intl ราคาถูกสุดกดดูที่ร้านค้า
Coming Soon...